Liquid Filter Bags

Products Description Liquid filter bags are designed to remove contaminants (solid particles, sludge, or gels) from liquids in industrial systems. They are installed in bag filter housings and act as a barrier, allowing clean fluid to pass through while trapping impurities. How it works The...

Products Description

Liquid filter bags are designed to remove contaminants (solid particles, sludge, or gels) from liquids in industrial systems. They are installed in bag filter housings and act as a barrier, allowing clean fluid to pass through while trapping impurities.

How it works

The working principle of liquid filter bags is as follows:

1. Contaminated liquid enters the bag through the housing inlet.

2. Multi-layer fabrics capture particles based on size:

Outer Layer - Stops large debris (e.g., metal chips).
Middle Layer - Traces medium particles (e.g., sand).
Inner Layer - Blocks fines down to 1 micron (e.g., sediment).

3. Clean fluid exits through the bag's drainage layer.

Technical parameters

Model	1#	2#	3#	4#	5#
Bag Size	Φ180*430mm	Φ180*810mm	Φ105*230mm	Φ105*380mm	Φ150*550mm
Maximum Flow Rate	20m³/h	40m³/h	6m³/h	12m³/h	18m³/h
Filtration Area	0.25㎡	0.5㎡	0.09㎡	0.16㎡	0.18㎡
Filtration Accuracy	1, 3, 5, 10, 15, 25, 50, 75, 100, 150, 200, 300µm
Bag Material	PE, PP, Nomex, PTFE, etc
Operating Temperature	PE: 130℃; PP: 90℃; Nomex: 204℃; PTFE: 240℃
Bag Mouth Fixing Ring Material	Galvanized steel rings, Stainless steel rings, Plastic rings

features

1. Engineered to Cut Operational Costs

25% longer service life vs. standard bags – reduce changeouts & downtime
Withstand 8 bar pressure without seam failure – avoid costly process interruptions

2. Certified Contamination Control