Products Description
Melt blown sediment filters are typically made from polypropylene fibers and designed to remove sand, silt, rust, and other suspended particles from fluids. Featuring a multi-density layered structure, the outer layer captures larger particles while the inner layers filter finer contaminants. They are the optimal choice for residential, commercial, and industrial water applications.
Technical parameters
| Parameter | Specification |
| Filter Material | 100% Pure Polypropylene |
| Micron Ratings | 1, 3, 5, 10, 50, 100 μm |
| Length | 4 7/8", 10", 20", 30", 40" |
| Diameter | 2.5", 4.5" |
| Maximum Temperature | 140℉ |
| Recommended Change-out Differential Pressure | 1.4 bar |
| End Cap | DOE (open), SOE, 222/226 o-ring, flat/fin |
| O-ring | Buna-N, EPDM, silicone, Viton, PTFE |
| Packaging | Single-bag sealed |
Key Features
✅ Multi-layer structure for deep filtration.
✅ High dirt-holding capacity reduces replacement frequency.
✅ Polypropylene construction ensures excellent chemical compatibility.
✅ Free of leachables and extractables to prevent contamination.
✅ Standard lengths and end connections compatible with common housings.
Applications
- Drinking Water
- Wastewater
- Industrial Water
- Food & Beverage
- Coolant
- Ink & Coatings
- Reverse Osmosis Pre-filtration
- Fine Chemicals
- Electroplating Solutions
- Pulp & Paper
Performance
Flow vs. Pressure Drop of 10" Melt Blown Sediment Filter
| 2.5" OD Filter Cartridges | 4.5" OD Filter Cartridges |
 |
 |
workshop
 |
 |
 |
 |
Ordering information
Quality Commitment
- Each filter individually tested
- Performance certified to industry standards
- Non-toxic, food-grade materials
- Consistent batch quality
- Comprehensive documentation
FAQ
Q: Are melt blown sediment filters suitable for well water?
A: Yes, our filters are highly effective for well water treatment, efficiently removing sand particles, silt, and other common particulates found in groundwater.
Q: Do you offer custom filters in special sizes?
A: Yes, we provide customization options to fit various filter housings. Please contact our technical team with your housing specifications so we can recommend compatible cartridge options.
Q: How can I determine if a filter cartridge has failed?
A: Monitor the differential pressure. Replace the cartridge when the differential pressure reaches the system alarm/setpoint or when the target flow rate cannot be maintained.
Hot Tags: melt blown sediment filter, China melt blown sediment filter manufacturers, suppliers, factory, filter bag, pp melt blown filter cartridge, spun bonded filter cartridge, spun filter cartridge, stainless steel sintered filter element, string wound filter cartridge