Products
Vacuum Dehydration Turbine Oil Purifier
video
Vacuum Dehydration Turbine Oil Purifier

Vacuum Dehydration Turbine Oil Purifier

Product Introduction ‌Vacuum dehydration turbine oil purifier is a device specially used for purifying turbine oil. It can effectively remove impurities such as water, suspended matter, particles, etc. in the oil under vacuum state to ensure the normal operation and safety of the system....
Product Introduction

 

‌Vacuum dehydration turbine oil purifier is a device specially used for purifying turbine oil. It can effectively remove impurities such as water, suspended matter, particles, etc. in the oil under vacuum state to ensure the normal operation and safety of the system.

‌Vacuum dehydration turbine oil purifier is mainly used for online oil treatment in the power, chemical, shipbuilding, railway, metallurgy and other industries. This equipment can effectively remove various pollutants, improve the fluid cleanliness level, and meet the unit operation requirements through advanced filtering and purification technology.

 

flow chart

 

product-850-452

 

Features

 

  • Efficient purification process: The equipment uses advanced technology to efficiently remove water, gases and impurities. The purification process is carried out in a vacuum to ensure minimal oxidation of the oil.
  • Advanced Vacuum System: Uses high-quality vacuum pumps and a unique vacuum pipe layout designed to achieve stable and high vacuum.
  • Equipped with a temperature control system: the oil temperature can be maintained at the right level throughout the purification process. This prevents the fluid from overheating and ensures its stability.
  • High-quality filter elements: Equipped with high-quality filter elements to remove fine particles and impurities. Easy to replace and can be used for a long time.
  • Automatic control system: oil level, temperature, pressure and flow can be monitored, and the parameters can be adjusted accordingly. It is easy to operate and ensures safe and reliable operation.

 

Maintenance tips

 

  • Regularly check the oil condition of the vacuum pump: When the vacuum pump is working, attention should be paid to check the oil condition displayed on the oil mark to ensure that it is within the standard range. If it is found that there is more moisture or deterioration and emulsification, the special vacuum pump oil should be replaced in time.
  • Inspection and maintenance of the cooler: When it is found that there is a lot of water in the cooler during operation, it should be discharged in time.
  • Inspection of control system and equipment: Attention should be paid to checking the operation of oil pump and vacuum pump to ensure that the equipment runs safely and reliably. The temperature controller should be sensitive and reliable, the pump shaft seal should be intact and free of leakage, and the piping system should be free of blockage.
  • Requirements for the storage environment of the equipment: If the equipment is shut down for more than one month, it should be placed in a dry environment, and the cabinet door and body should be closed to prevent the equipment from being damaged by moisture.
  • Regular replacement of filter elements: Use the filter elements recommended by the manufacturer to ensure adequate lubrication and heat dissipation of the turbine main shaft. At the same time, the filter element should be cleaned or replaced regularly to prevent dust and other pollutants from entering the turbocharger impeller running at high speed.
  • Avoid shutting down the engine immediately: After the engine is running, the engine should be avoided immediately, especially in high temperature conditions, to prevent the oil inside the turbocharger from scorching due to a sudden engine stop.
  • Precautions after preheating and starting: In the cold season, the engine should run at idle state for a period of time after starting, ensure that the lubricating oil fully lubricates the bearing, and avoid sharply increasing the throttle to avoid damaging the oil seal of the supercharger.

 

Customer Site

 

product-850-850

Hot Tags: vacuum dehydration turbine oil purifier, China vacuum dehydration turbine oil purifier manufacturers, suppliers, factory, turbine oil purifier, turbine oil filtration system for power plant, portable turbine oil purifier, turbine oil purification system, coalescer type turbine oil purifier, high vacuum turbine oil purifier machine

Send Inquiry