Rich Amine Filter
video
Rich Amine Filter

Rich Amine Filter

Products Description Amine rich filters are specialized mechanical filters installed on the rich amine side of gas sweetening units to capture suspended solids, corrosion products and entrained hydrocarbons before they foul regenerator, heat exchanger and contactor packing. It employs pleated...

Products Description

 

Amine rich filters are specialized mechanical filters installed on the rich amine side of gas sweetening units to capture suspended solids, corrosion products and entrained hydrocarbons before they foul regenerator, heat exchanger and contactor packing.
It employs pleated polypropylene microfiber media with β-≥5000 efficiency at 10 µm to maintain total suspended solids (TSS) below 1 ppmW, extending filter life to 4–8 weeks and protecting downstream equipment against fouling and corrosion.

 

Product Classification

 

polypropylene-filter-element

Polypropylene Filter Elements

For suspended solids > 5 ppm, ideal for plate and frame heat exchangers prone to channel clogging.

coalescer-filter-elements

Coalescer Filter Elements

For removal of entrained fluids (amines, water, hydrocarbons).

activated-carbon-filter

Activated Carbon Filters

For dissolving organic acids and hydrocarbons, removing amine degradation products and oils.

Technical parameters

 

Product Name Rich Amine Filter
Micron Rating 10 µm depth filtration with β = 5000 efficiency at 10 µm
Flow Style Full‐flow (100 % bypass no‐bypass configuration)
Filter Media Multi‐layer polypropylene or fiberglass depth media, compatible with rich amine chemistry
Dimensions Standard OD 6″, lengths of 40″, 60″, 80″; custom lengths available on request
Operating Temperature –10 °C to 150 °C (14 °F to 302 °F)
Differential Pressure Maximum 2 bar (29 psi)

 

Key features

rich-amine-filter
 

Ultra‐High Dirt Holding Capacity

Reduces element change frequency; typical service life of 4–8 weeks under continuous full‐flow conditions.

 

Corrosion Resistance

Media and hardware formulated to withstand H₂S/CO₂ attack and minimize amine degradation.

rich-amine-filter
rich-amine-filter
 

Foam Control

Removal of fine particulates and organic acids lowers foaming tendency in absorber and regenerator.

 

Low Pressure Drop

Engineered pleat geometry ensures minimal ΔP across element throughout service life.

rich-amine-filter

 

Real Client Cases

 

Case 1: Offshore Gas Platform, Norway

 

 

  • Issue: Frequent amine foaming due to hydrocarbon carryover.
  • Solution: Installed coalescing filter elements with hydrophobic media.
  • Result: Foaming reduced by 80%, amine consumption dropped 15%.

Case 2: Middle East Refinery

 

 

  • Issue: Heat-stable salts (HSS) caused corrosion in stripper reboilers.
  • Solution: Adsorptive filters with ion exchange resin layers.
  • Result: HSS levels cut from 2.5% to 0.3%, maintenance intervals doubled.

 

FAQ

 

Q: How often should I replace Rich Amine filters?

A: Typical lifespan is 6–12 months. Monitor ΔP: Replace when pressure drop exceeds 2 bar.

Q: Can these filters handle methyldiethanolamine (MDEA)?

A: Yes. Confirm compatibility with your amine's pH and temperature.

Q: Lead time for custom orders?

A: 2–3 weeks for standard specs; 4–5 weeks for complex designs.

 

Hot Tags: rich amine filter, China rich amine filter manufacturers, suppliers, factory, pp melt blown filter cartridge, spun bonded filter cartridge, stainless steel sintered filter element, spun filter cartridge, pleated high flow filter element, melt blown filter cartridge

Send Inquiry