Polypropylene Melt Blown Filter

Polypropylene Melt Blown Filter

Products Description Our polypropylene melt blown filter is a depth-type filter cartridge constructed from gradient-density microfibers. It is designed to progressively trap suspended solids throughout the entire filter media, not just at the surface. The polypropylene material offers broad...

Products Description

 

Our polypropylene melt blown filter is a depth-type filter cartridge constructed from gradient-density microfibers. It is designed to progressively trap suspended solids throughout the entire filter media, not just at the surface. The polypropylene material offers broad chemical compatibility and low extractables content, making it a reliable pre-filtration solution for various industrial and municipal systems.

 

Technical parameters

 

Parameter Specification
Material 100% Polypropylene
Nominal retention 1 - 100 microns
Lengths 10 inches (254 mm), 20 inches (508 mm), 30 inches (762 mm), 40 inches (1016 mm)
OD 2.5 inches (63 mm); large-OD variants available
ID 1 inches
Max operating temperature 140℉
End types 222/226, Double O-ring, Plain ends
Gasket options EPDM, silicone, Viton (FKM), PTFE
Core Coreless
Housing fit Single or multi cartridge filter housing

 

Key Features


✅ Multi-stage Depth Filtration - Gradient density captures particles at various depths within the media
✅ Enhanced Dirt-holding Capacity - 40% greater capacity than standard filters
✅ Chemical Resistance - Compatible with most corrosive liquids and solvents
✅ Thermally Bonded - No chemical adhesives used, ensuring product purity
✅ Rugged Durability - Reinforced cartridges and multiple end cap options ensure reliable installation
✅ Flexible Configuration - Standard and custom options available to meet varying flow rates and housing requirements

 

Applications

 

  • Reverse Osmosis Prefiltration
  • Coolant
  • Food and Beverage
  • Oil and Gas
  • Chemicals
  • Electronics
  • Inks, Paints, and Coatings
  • Electroplating Solutions
  • Industrial Water Treatment
  • Pharmaceuticals

 

Performance

 

Flow vs. Pressure Drop of 10" Polypropylene Melt Blown Filter

 

2.5" OD Filter Cartridges 4.5" OD Filter Cartridges
product-538-450 product-538-450

 

workshop

 

product-400-400 product-400-400 product-400-400 product-400-400

 

Ordering information


product-1078-432

 

FAQ

 

Q: What causes sudden pressure spikes after installation?

A: Common causes: improperly seated gasket, housing bypass, or an unexpected particulate surge; inspect seals and influent quality.

Q: Do you offer large-OD or high-flow options?

A: Yes - large-OD geometries are available to lower cartridge count in high-flow systems.

Q: What's your typical delivery time?

A: Standard products ship within 3-5 days. Custom orders typically require 10-15 working days, with expedited options available for urgent requirements.

 

Hot Tags: polypropylene melt blown filter, China polypropylene melt blown filter manufacturers, suppliers, factory, pleated filter cartridge, melt blown filter cartridge, spun filter cartridge, string wound filter cartridge, sintered metal filter cartridge, spun bonded filter cartridge

Send Inquiry