PP Melt Blown Cartridge Filter

PP Melt Blown Cartridge Filter

Products Description Our PP melt blown cartridge filters are constructed from thermally bonded polypropylene fiber layers featuring a gradient density structure. With filtration precision typically ranging from 1 to 100 µm , they deliver high particle retention capabilities, effectively...

Products Description

 

Our PP melt blown cartridge filters are constructed from thermally bonded polypropylene fiber layers featuring a gradient density structure. With filtration precision typically ranging from 1 to 100 µm, they deliver high particle retention capabilities, effectively removing sand particles, rust, and suspended solids.

 

Technical parameters

 

Parameter Specification
Material 100% Pure Polypropylene
Micron Rating 1-100 µm
Standard Length 10", 20", 30", 40"
Outside Diameter Common 2.5", 4.5"
Max Operating Temperature 60°C
Recommended Change-out Differential Pressure 20psid
End Cap Material Polypropylene
O-rings Buna N, EPR, Silicone, Viton, etc

 

Key Features


✅ Gradient density pore structure for deep filtration
✅ All-polypropylene (PP) construction with no adhesives
✅ High dirt-holding capacity and low pressure drop
✅ Resistant to mildly corrosive chemicals
✅ Easy installation and replacement
✅ Compliant with FDA, NSF and ISO 9001 standards
✅ Standard and custom options available

 

Applications

 

  • Water Treatment Systems
  • Chemical Processing
  • Food & Beverage Production
  • Pharmaceutical Manufacturing
  • Industrial Coolant Systems
  • RO/UF pre-filtration
  • Desalination
  • Paints and Coatings

 

Performance

 

Flow vs. Pressure Drop of 10" PP Melt Blown Cartridge Filter

 

2.5" OD Filter Cartridges 4.5" OD Filter Cartridges
product-538-450 product-538-450

 

workshop

 

product-400-400 product-400-400 product-400-400 product-400-400

 

Ordering information


product-1078-432

 

FAQ

 

Q: When should the filter cartridge be replaced?

A: Replace when pressure drop increases significantly or every 3-6 months based on usage.

Q: Chemical compatibility?

A: Compatible with most chemicals, acids, and alkalis. Contact us for specific chemical resistance charts.

Q: What is the micron rating for reverse osmosis pre-filtration?

A: Reverse osmosis pre-filters typically use 1–5 µm pore sizes; select the appropriate cartridge based on feed water quality and acceptable scaling levels.

Q: What end cap types do you offer?

A: DOE, SOE, 222/226 o-ring, flat/fin; BSP/NPT adapters available upon request.

 

Hot Tags: PP Melt Blown Cartridge Filter, China PP Melt Blown Cartridge Filter manufacturers, suppliers, factory, melt blown filter cartridge, sintered metal filter cartridge, pp melt blown filter cartridge, high flow filter cartridge, polyester pleated high flow filter cartridge, pleated filter cartridge

Send Inquiry