Products Description
Glass fiber filter cartridges are made of pure borosilicate microglass fibers and feature a gradient density structure that effectively captures fine particles in critical liquid processes while providing excellent contaminant holding capacity and thermal stability.
Technical parameters
| Parameter | Specification |
| Filtration Type | Depth Filtration |
| Filter Media | Borosilicate Microfiberglass (Binder-Free options available) |
| Common Diameters | 67.8mm(OD), 25.4mm(ID) |
| Common Lengths | 10", 20", 30", 40" |
| Absolute Ratings | 0.2, 0.45µm, 1.0µm, 3.0µm, 10µm |
| Max Operating Temperature | 240°C / 464°F (Continuous, dependent on housing/seals) |
| Max Differential Pressure | 80 psid @ 70°F (5.5 bar @21°C), 40 psid @ 150°F (2.75 bar @60°C) |
| Support Layer | Polyester |
| End Caps | Polypropylene (bonded for integrity) |
| Seals | Integral Silicone, EPDM, Viton (select per chemical compatibility) |
features
✅ Graded-density glass microfiber media
Benefit: Progressive capture from coarse to fine maximizes dirt-holding capacity and extends run time, reducing change-out frequency and operating costs.
✅ Low extractables / chemically compatible matrix
Benefit: Stable performance in a wide range of solvents, hydrocarbons and aqueous chemistries - ideal for sensitive process streams where product purity matters.
✅ Configurable end fittings & support cores (PP / stainless / PTFE options)
Benefit: Easy retrofit into common housings and compatibility with higher temperatures or aggressive chemistries - lowers integration cost and risk.
Performance
Flow vs. Pressure Drop of Glass Fiber Filter Cartridges
Applications
- Chemicals
- Blowdown post filter
- Magnetic tape coatings
- Wine Prefiltration
- Paint /Inks
- Oil & Gas
Ordering Guide
Example: MGF3.0-10S4E
| MGF | 3.0 | 10 | S4 | E |
| Product Code | Micron | Length | End Cap Configuration | Gasket/O-ring |
| MGF |
0.2 0.45 1 3 10 30 |
9.75" 10" 19.75" 20" 20.95" 30" 40" |
S1 = DOE S3 = 222 w/ Fin End S4 = 222 w/ Flat End S5 = 226 w/Fin End S6 = 226 w/ Flat End S7 = Internal O-ring with Recessed Plug S9 = Internal O-ring on both ends |
B = Buna N E = EPDM S = Silicone V = Viton T = Teflon Encapsulated Viton (0-ring only) |
End cap type
Hot Tags: glass fiber filter cartridges, China glass fiber filter cartridges manufacturers, suppliers, factory, string wound filter cartridge, pleated high flow filter element, pleated filter cartridge, spun filter cartridge, high flow filter cartridge, sintered metal filter cartridge