10 Inch String Water Filters
video
10 Inch String Water Filters

10 Inch String Water Filters

Products Description The 10 inch string water filters is designed for reliable pre-filtration and particle removal in industrial, commercial, and municipal water supply systems. These cartridges use precision-wound yarn on a rigid core to produce a controlled, graded pore structure that captures...

Products Description

 

The 10 inch string water filters is designed for reliable pre-filtration and particle removal in industrial, commercial, and municipal water supply systems. These cartridges use precision-wound yarn on a rigid core to produce a controlled, graded pore structure that captures particulates throughout the filter body while maximising dirt-holding capacity and service life.

 

Product details

 

filter-front-view filter-side-view
filter-upper-cover-view filter-lower-cover-view

 

Technical parameters

 

Parameter Specification/Range
Nominal cartridge length 10 inches (254 mm)
Standard outer diameter 2.5 inches (63.5 mm) (other diameters available on request)
Core Rigid polypropylene core (standard); stainless steel or plated core optional for high-temperature/pressure applications
Filter media (string/wound yarn) Polypropylene (standard); alternatives: polyester, cotton, nylon, fiberglass
Micron ratings (nominal) 0.5, 1, 5, 10, 20, 50, 100, 150 µm (custom ratings available)
Typical operating temperature (material dependent) Polypropylene up to ~82°C (180°F); polyester/nylon options available for higher temperatures (specify application for exact rating)
Typical recommended replacement point ΔP increase of 0.7–1.5 bar (10–22 psi) or when flow falls below acceptable level
Typical flow guidance (per single 10" cartridge) 2–10 m³/h (≈9–44 gpm) depending on micron rating and system hydraulics; use multi-cartridge housings for higher flows.
Note: values above are representative. For pressure, temperature and flow guarantees we provide application-specific datasheets and test certificates.

 

features


✅ Up to ~2.8× service life vs. surface filters - higher dirt-holding means fewer replacements and less downtime.
✅ Predictable ΔP & performance - delivered with flow vs. pressure-drop curves for accurate system sizing.
✅ Chemical-ready material options - PP, polyester, nylon, fiberglass, fluoropolymer wraps and stainless cores for acids, alkalis, amines, hydrocarbons and oxidizers.
✅ Traceable QA & certs - raw-material checks, particle challenge, ΔP/pressure tests, extractables reports; third-party certification available.

 

Applications

 

🔹 Potable liquids & municipal pre-filtration - bulk solids removal ahead of activated carbon, softeners and disinfection.

🔹 Industrial process water & coolant protection - machining, plating, boiler-feed and heat-exchanger protection.

🔹 Oil, petrochemical & hydrocarbon lines - protection of downstream equipment from entrained particulates in petroleum oils and lubricants.

🔹 Chemical process streams - handling of alkalis, dilute/mineral acids, organic acids, amines and many solvents when the proper media/core material is selected.

🔹 Food & beverage (non-sterile pre-filtration) - clarification and particulates control prior to polishing stages.

 

production workshop

 

filter-production-workshop1 filter-production-workshop2
filter-production-workshop3 filter-production-workshop4

 

Selection guide

 

string-water-filter-model-table

 

fAQ

 

Q: How often should a 10-inch string water filter be replaced?

A: Replacement interval depends on feedwater quality, particle load and flow rate. Typical replacement criteria are a measurable pressure drop increase (e.g., ΔP rise of 0.7–1.5 bar), reduced flow, or a scheduled preventative-maintenance interval (often 3–12 months in many systems). We recommend monitoring differential pressure and planning replacement before performance or downstream protection is compromised.

Q: Are custom end-caps available?

A: Yes. Provide thread specifications (e.g., NPT, BSP) for tailored solutions.

Q: Do you offer testing data for specific cartridge performance?

A: Yes. We provide detailed test reports, including bubble point, flow rates, and dirt-holding capacity for specific configurations upon request, backed by our ISO 9001 quality system.

 

Hot Tags: 10 inch string water filters, China 10 inch string water filters manufacturers, suppliers, factory, high flow filter cartridge, polyester pleated high flow filter cartridge, sintered metal filter cartridge, pleated high flow filter element, melt blown filter cartridge, pleated filter cartridge

Send Inquiry