Products Description
PP wound cartridge filter is made of high purity polypropylene fiber as raw material and is carefully made through advanced winding technology to form a gradient pore structure. This structure not only has deep filtration capability, but also can achieve the dual effect of surface retention.
Product details
![]() |
![]() |
![]() |
![]() |
Technical parameters
| Parameter | Value |
| Nominal Rating | 0.5-150µm |
| Material | 100% Polypropylene |
| Lengths Available | 10″, 20″, 30″, 40″ |
| Outer Diameter | 2″, 2.5″, 2.75″, 4.5″ |
| Max. Temp. | 60°C(PP core), 82 °C(Metal core) |
| End Caps / Core Options | 222, 226, DOE Flat, SOE |
| Recommended Flow | Up to 10 LPM per 10″ cartridge |
features
✅ Precise capture of micron-sized particles: Targets fine silt, sand, and rust effectively.
✅ High contaminant loading: Reduces change frequency and total cost of ownership.
✅ Broad chemical resistance: Pure PP construction withstands acids, alkalis, and solvents (pH 1–14).
✅ Minimal media migration: Binder-free design ensures fluid purity.
✅ Mechanical robustness: Withstands 4 bar (58 psi) differential pressure at 25°C.
Applications
- Water Treatment: Sediment removal for municipal, RO, and UV pretreatment.
- Food & Beverage: Clarification of juices, syrups, and process water.
- Chemical Processing: Protecting downstream membranes and pumps.
- Paints & Coatings: Ensuring smooth finishes by removing overspray particulates.
- Pharmaceuticals & Cosmetics: Particulate control in formulation and rinse water.
production workshop
Scalable Capacity & Reliable Delivery
- High-volume automated production lines ensure consistent supply for large OEM contracts.
- Flexible manufacturing accommodates custom lengths, micron ratings, and end cap configurations.
- Global logistics network supports fast, reliable delivery with bulk order discounts available.
![]() |
![]() |
![]() |
![]() |
Selection guide

FAQ
Q: Can pp wound filter cartridges filter hot oils or solvents?
A: Yes. Compatible with hydrocarbons and solvents up to 82°C (180°F). Confirm fluid compatibility with our technical team.
Q: Can I use this in a high-flow system?
A: Flow rates vary by housing size and pressure. Consult our flow/pressure drop charts or contact us for application-specific data.
Q: How do I know if the filter element needs to be replaced?
A: When the system pressure differential reaches three times its initial value, or the filtration flow rate drops to 60% of the design value, the filter element may be clogged and needs to be replaced.
Hot Tags: PP Wound Cartridge Filter, China PP Wound Cartridge Filter manufacturers, suppliers, factory, sintered metal filter cartridge, high flow filter cartridge, pleated high flow filter element, spun bonded filter cartridge, string wound filter cartridge, filter bag











