Blog

Identification method of viscosity change of hydraulic filter element

Jun 04, 2024 Leave a message

1. Glass plate tilt method: Take a clean glass plate, place it horizontally, and drop a drop of the measured hydraulic oil filter on the glass, at the same time drop a drop of standard hydraulic oil filter (new hydraulic oil filter of the same brand) next to it, and then tilt the glass plate, and pay attention to observe: If the flow rate and flow distance of the measured oil are larger than the standard oil, it means that its viscosity is lower than the standard oil, and vice versa, it means that its viscosity is higher than the standard oil.
2, glass bottle inversion method: the measured hydraulic oil filter liquid and standard oil are respectively placed in two transparent glass bottles of the same size and length (do not fill too full), and then plug the two bottles with a stopper. Place two bottles side by side, then quickly turn both bottles upside down at the same time. If the bubble of the measured hydraulic oil filter in the bottle rises faster than the bubble of the standard oil in the bottle, it indicates that the viscosity of the oil is lower than that of the standard oil, and conversely, it indicates that the viscosity of the oil is higher than that of the standard oil; If the two oil bubbles rise at similar rates, the viscosity is similar.

Send Inquiry