HDP10 Series Oil Purifier

HDP10 series oil purifier is specially designed for deep purification of industrial lubricating oil, hydraulic oil and other oils. The equipment integrates advanced filtration technology and vacuum dehydration technology to remove fine particles, dissolved water and free gases from the oil, providing clean oil protection for industrial equipment.

• Equipped with a vacuum tower design, it can produce a very effective water removal effect.
• High-quality components are used to meet the needs of more demanding industrial applications.
• It has a wide range of applications and can adapt to different changes in ambient temperature and oil viscosity.
• It is easy to operate and does not require additional cooling or pump-running water facilities.

• Wash regularly

Purpose: To remove the accumulated dirt and impurities in the HDP10 oil purifier and keep it in normal working condition.

Operation: Use a special cleaning agent and clean according to the requirements of the instructions provided by the manufacturer. Ensure thorough removal of contaminants.

• Replace the filter element regularly

Purpose: The filter element is a key component of the oil purification system, which directly affects the filtration effect. After prolonged use, it will clog or lose its filtering capacity.

Operation: Replace the filter element regularly according to the manufacturer's recommendations to ensure filtration effectiveness and working performance.

• Check the sealing performance

Purpose: To prevent oil leakage or contamination.

Operation: Regularly inspect the seals of the equipment, and replace or repair them in time if problems are found.

• Lubrication maintenance

Purpose: Reduce friction and wear of key components and prolong the service life of equipment.

Operation: Follow the manufacturer's guidelines to lubricate and maintain critical components in the equipment.

• Electrical and mechanical inspections

Power supply check: ensure that the power supply used is consistent with the motor nameplate to avoid electric shock accidents caused by missing items or the cover of the power reversing switch falling off.

Oil pump inspection: check whether the rotation direction of the oil pump is correct, as well as the concentricity of the oil pump and the connecting shaft, and the tightening of the fastening screws. If the oil pump has abnormal sound, it should be stopped in time to check the cause.

• Alarm and protection function checks

Purpose: To ensure that the equipment can alarm and shut down in time under abnormal conditions to prevent further damage.

Operation: Check whether the alarm and protection functions are working properly, such as automatic fault alarm, safe automatic water discharge and other functions.

• Follow operating procedures and safety norms

Before carrying out any maintenance operations, it is important to follow the relevant operating procedures and safety operation specifications, and take protective measures to avoid accidental injuries.

• Precautions

Due to the differences in structure and function of different models of oil purifiers, it is important to refer to the detailed instructions provided by AYATER or contact us for professional guidance when performing maintenance.

Hot Tags: hdp10 series oil purifier, China hdp10 series oil purifier manufacturers, suppliers, factory, hydraulic oil purifier for wires, hydraulic oil purifier for engineering mechanics properties control, hydraulic oil purifier for preventive maintenance systems, hydraulic oil purifier for density control, hydraulic oil purifier for transportation, hydraulic oil purifier for medium-term maintenance systems