Carbon Steel Bag Filter Housing
video
Carbon Steel Bag Filter Housing

Carbon Steel Bag Filter Housing

Carbon steel bag filter housings are made of carbon steel and are designed to remove particulate contaminants from liquids and handle a wide range of flows. It adopts the methods of side in and side out, side in and bottom out or bottom in and out, etc., and presses or pumps the liquid to be filtered into the filter through the pressure in the pipeline, so as to carry out the filtration process.
Product Introduction

 

Carbon steel bag filter housings are made of carbon steel and are designed to remove particulate contaminants from liquids and handle a wide range of flows. It adopts the methods of side in and side out, side in and bottom out or bottom in and out, etc., and presses or pumps the liquid to be filtered into the filter through the pressure in the pipeline, so as to carry out the filtration process. Because the liquid flows from the top of the filter bag after entering the filter, the liquid can be evenly distributed, the influence of turbulence is small, the filtration effect is good, and the operating cost is low.

Carbon steel bag filter housing can be divided into single bag filter housing and multi-bag filter housing, if there are special requirements, you can choose to customize.

 

Product Details

 

product-850-850

 

Working Principle

 

The carbon steel bag filter housing is mainly composed of three parts: the filter vessel, the support basket and the filter bag. Depending on the flow requirements, there is an option to use multiple filter bags in a single filter.

The working principle is as follows: the liquid enters through the filter inlet, and is rushed into the filter bag above the filter bag supported by the mesh basket, and the filter bag is unfolded because of the impact pressure of the liquid and the uniform pressure surface, then the particle pollutants are trapped in the filter bag, the clean liquid is discharged from the filter outlet, and then the whole filtration process is completed.

During the replacement or cleaning of the filter bag, the eye bolt is loosened, and the upper cover is lifted by rotating the handwheel, and then it can be removed.

 

Applications

 

  • Food and beverages
  • Desalination
  • Coatings, paints and inks
  • Electronics
  • Industrial water treatment
  • Lubricants, metalworking fluids
  • Automobile manufacturing

 

About Us

 

product-850-1000

Hot Tags: carbon steel bag filter housing, China carbon steel bag filter housing manufacturers, suppliers, factory, construction bag filter housing, automotive bag filter housing, hvac bag filter housing, transformer bag filter housing, plastic processing bag filter housing, stainless steel bag filter

Send Inquiry