Products Description
The SS multi bag filter housing is designed for high-flow, high-load liquid applications. Its robust stainless steel housing, combined with multiple filter bags, achieves efficient impurity interception and high-flow processing, while extending bag change intervals. Its quick-open design and high-strength clamping mechanism ensure fast and convenient bag replacement, a tight seal, and zero leakage risk.
video
Product structure diagram

- Liquid enters the filter housing through the inlet;
- The fluid is evenly distributed within the multiple filter bags.
- Under pressure, the liquid flows from the inside of the filter bags to the outside.
- Solid impurities are trapped within the filter bags, and the purified liquid is collected in the outer cavity of the housing.
- The filtered clear liquid is discharged through the outlet, completing the solid-liquid separation process.
Advantages Comparison
| Technical Dimension | SS Multi Bag Filter Housing | SS Single Bag Filter Housing |
| Filtration Area | Large (up to tens of square meters), filter bags are arranged in parallel to reduce unit flow load | Small (1–2 m²), a single bag carries the entire flow |
| Handling Traffic | High flow rates for continuous operation from 50–1000 m³/h | Low flow, suitable for intermittent or small batch conditions |
| Differential Pressure Control | The initial pressure difference is low, the operation is stable, and the pressure rises slowly after the particles accumulate | The initial pressure difference is relatively high, and the filter bag is easily saturated and pressurized quickly |
| Maintenance Cycle | Long | Short |
| Convenience of Operation | Quick-open or hanging cover design, multiple filter bags can be replaced at a time | The top cover has a single opening, and only one filter bag can be replaced at a time |
| Material Adaptability | Optional SS304, SS316L, duplex steel | Conventional SS304 or carbon steel |
Factory real shots
|
|
|
|
|
|
Application field
Application field
👉Water Treatment
👉Paints, Coatings & Inks
👉Petrochemical & Oil Refining
👉Fine Chemicals & Pharmaceuticals
👉Food & Beverage
Automobile paint shop (Japan)
An automotive paint shop in Japan introduced a 12-bag, side-entry filter housing to treat the pre-paint degreasing tank fluid, removing particulate matter and grease. Compared to the previous single-bag system, this system provides more stable fluid circulation and reduces coating defect rates by 22%.
Customer site
![]() |
![]() |
![]() |
![]() |
Hot Tags: ss multi bag filter housing, China ss multi bag filter housing manufacturers, suppliers, factory, replacement parts bag filter housing, research and development bag filter housing, transformer bag filter housing, control panel manufacturing bag filter housing, plastic processing bag filter housing, clean liquid bag filter housing









