Auto Self Cleaning Strainer
video
Auto Self Cleaning Strainer

Auto Self Cleaning Strainer

Product Introduction The auto self cleaning strainer is one of the advanced self cleaning filter designed to remove unwanted particles and solid contaminants from liquids. It is manufactured using an innovative filtration process that ensures high filtration efficiency and low maintenance costs....
Product Introduction

 

The auto self cleaning strainer is one of the advanced self cleaning filter designed to remove unwanted particles and solid contaminants from liquids. It is manufactured using an innovative filtration process that ensures high filtration efficiency and low maintenance costs. In addition, the auto self cleaning strainer is equipped with a cleaning system driven by a motor to clean the filter elements by using a rotating brush or a backwash mechanism, etc.

 

Working Principle

 

Filtration process: the liquid flows into the filter from the water inlet, and flows out from the water outlet after passing through the filter screen, impurities accumulate on the inner surface of the filter screen to form a filter cake, and at the same time, the pressure difference between the inside and outside of the filter screen is gradually formed, and when the pressure difference reaches the set value, the pressure sensor sends a signal to the PLC control system.

Self-cleaning process: When the differential pressure reaches a preset value, the differential pressure switch sends a signal to the PLC control system. The PLC control system drives the motor, the shaft starts to rotate, and the rotating brush or scraper removes the impurities from the inner surface of the filter. At the same time, the drain valve is opened, and the impurities are discharged from the drain valve under the action of the internal pressure of the system. The entire cleaning process is done automatically and in just a few seconds, without interrupting the main water flow during the self-cleaning process.

 

Features

 

  • All internal replacement parts are made of corrosion-resistant materials.
  • Continuous, uninterrupted and unattended removal of impurities is possible.
  • Standard and custom engineering designs are available.
  • Rigid components prevent bending that can lead to premature component failure.

 

Workshop

 

product-850-850

 

More Products

 

product-850-850

 

Hot Tags: auto self cleaning strainer, China auto self cleaning strainer manufacturers, suppliers, factory, self cleaning filter, automatic self cleaning screen filter, water treatment equipment, automatic self cleaning brush filter, scanning self cleaning filter, scraper self cleaning filter

Send Inquiry