What Are The Precautions For Pipeline Filter Operation?

The pipeline filter is installed on the pressure pipe of the hydraulic system to filter out the mechanical impurities mixed in the hydraulic oil and the colloid, leaching quality, carbon slag quality generated by the chemical change of the hydraulic oil itself, so as to prevent the valve core stuck, the blockage of the orifice gap and the damping hole and the rapid wear of the hydraulic components. So what do you know about pipeline filter operation precautions?
Pipeline filter operation precautions:
The pipeline filter is simple to operate. When using, just install the filter bag with the required fineness grade in the filter cartridge, check whether the O-ring seal is intact, and then tighten the ring bolt of the filter cartridge cap, you can put into work. After the pump starts, the pressure gauge on the filter rises slightly, and the initial pressure is about 0.05MPa. With the extension of the use time, the filter slag in the cylinder gradually increases. When the pressure reaches 0.4MPa, the tube cover should be shut down to check the slag in the filter bag, and the filter bag can be replaced to continue to use.
Pipeline filter has the advantages of compact structure, large filtration capacity, small pressure loss, wide application range, easy maintenance, low price, etc. Its main application materials are: chemical, petrochemical production of weak corrosive materials. Such as: water, oil, ammonia, hydrocarbons, etc. Corrosive materials in chemical production, such as caustic soda, soda ash, concentrated sulfuric acid, carbonic acid, aldehyde acid, etc.