The maintenance of hydraulic filter mainly lies in the following points:
1. The main granular impurities of the hydraulic filter element of the hydraulic system come from the normal mechanical wear of the hydraulic system, and the air suction of the oil tank will also bring dust. The "disassembly pollution" of the hydraulic system overhaul "The iron filings impurities crushed by the hydraulic pump that are less than the filtration accuracy of the hydraulic oil filter 10 microns or less are all present in the oil".
2, the hydraulic oil in the hydraulic filter element in the process of using 2000 hours, the oil will also be in the flow with a little of the fine air bubble, from then on the oil will oxidize, the acid produced after the oxidation of the hydraulic oil, the substance will change the color of the oil, or red or black, increase the corrosion of the metal. The sludge sediment produced by rust will plug the small oil valve gaps on the hydraulic oil filter, the hydraulic oil radiator and the distributor.
3. In the hydraulic tank, the bubbles mixed with the oil circulate with the oil, which will reduce the pressure of the system, deteriorate the lubrication conditions, and produce abnormal noise, the hydraulic piston rod becomes black, the mechanical speed slows down, and the action is inconsistent, commonly known as "mechanical brain thrombosis".
Where Is The Key To The Maintenance Of Hydraulic Filter Element?
Jun 07, 2024
Leave a message
Send Inquiry
