Products Description
Phenolic Resin Fiber Filter Cartridge is a rigid, resin-bonded depth cartridge engineered for reliable particle removal and extended on-stream life when filtering high-temperature or high-viscosity liquids. Its graded-porosity, grooved outer surface and long-staple fiber matrix deliver low differential pressure, high contaminant capacity, and minimal media migration in solvent-based coatings, inks and industrial fluids.
Technical parameters
| Media | Acrylic / polyester fiber, phenolic resin-impregnated (resin-bonded) |
| Construction | Coreless, one-piece, rigid matrix; grooved surface |
| Standard lengths | 10″ - 40″. Custom lengths available |
| Outside diameter | 65 ± 2 mm (nominal 2.56″) |
| Inside diameter | 28–29 ± 0.5 mm (nominal 1.06–1.14″) |
| Micron ratings (nominal) | 1 - 200 μm |
| Max operating temperature | 121 °C (dependent on end-cap and seal material) |
| Viscosity handling | Designed for high-viscosity fluids (suitable for fluids up to ~15,000 SSU under recommended flow conditions) |
| Max differential pressure | 4.0–6.0 bar (varies with temperature) |
| Recommended change-out ΔP | 2.0–2.5 bar for most coatings/viscous applications |
| End caps / connections | DOE (double open end), 222/226 O-ring flat/fin, 222/226 single open end options |
| O-ring / gasket options | Silicone, EPDM, NBR, Viton (FKM) |
| Materials to avoid | Strong oxidizers, concentrated sulfuric/nitric acids, strong alkalis at high temperature - confirm compatibility case by case |
| Certifications / quality | Manufactured under ISO-9001 framework (certificate available on request) |
Product Types
![]() |
![]() |
![]() |
|
Acrylic Fiber With Phenolic Resin-bonded (Brown) |
Cellulose Fiber With Melamine Resin-bonded (White) |
Polyester Fiber With Phenolic Resin-bonded (Dark Brown) |
Key features & benefits
✅ Graded-porosity, depth-matrix - captures large particles on the outside and fines deeper in the media for maximum dirt holding and longer life.
✅ Grooved or spiral-wrapped outer surface - increases effective surface area for higher throughput and extended service intervals.
✅ Phenolic resin bonding + long-staple fibers - rigid, crush-resistant structure that resists unloading and media migration in high-viscosity streams.
✅ Low differential pressure at high flow - reduces pump energy and permits higher line speeds in coating and ink processes.
Performance
Flow Rate vs. Differential Pressure for 10 inch Phenolic Resin Fiber Filter Cartridge
applications
| Paints, Inks | Sealants | Emulsions |
| Varnishes | Coolants | Adhesives |
| Hydraulic Fluids | Lubricating Oils | Greases |
| Resins | Plasticizers | Waxes |
workshop
![]() |
![]() |
![]() |
FAQ
Q: Is this cartridge compatible with aromatic solvents (e.g., toluene, xylene)?
A: Yes - the phenolic-resin bonded matrix has broad solvent compatibility. Confirm seal/end-cap material (Viton recommended for aromatics).
Q: Can you supply custom lengths or non-standard end fittings?
A: Yes - we offer custom lengths, micron ratings and end-cap configurations to match your housings and process needs.
Q: Are these filters suitable for food or pharmaceutical applications?
A: Generally no. These cartridges are designed for industrial fluids and solvents. For potable or pharma use, request validated FDA-compliant alternatives.
Hot Tags: phenolic resin fiber filter cartridge, China phenolic resin fiber filter cartridge manufacturers, suppliers, factory, string wound filter cartridge, pp melt blown filter cartridge, pleated filter cartridge, sintered metal filter cartridge, melt blown filter cartridge, polyester pleated high flow filter cartridge









