Products Description
The automatic self cleaning scraper strainer is designed to continuously remove suspended particles from the process fluid. Unlike backwash filters, it does not rely on a backwash mechanism to remove contaminants that accumulate on the screen. Instead, it combines a scraper and brush to work together to provide a more reliable cleaning in a variety of conditions.
Working principle
The automatic self cleaning scraper strainer is usually composed of the housing, the filter screen, the scraper, the motor, the control system and other components. These components work together to provide an effective filtration solution for virtually any liquid.
During operation, the contaminated liquid enters the filter from the inlet, and after being filtered through the filter screen, the clean liquid flows out of the outlet, and the solid particles are trapped on the surface of the filter element.
When the impurities on the filter screen accumulate to a certain amount, the differential pressure reaches the preset value or the cleaning time reaches the set value, the control system will automatically start the cleaning program.
The scraper or brush begins to rotate to completely remove any particulate matter from the surface of the element, making all filter surfaces completely effective and non-clogging.
Scraped contaminants accumulate at the bottom of the filter and are regularly discharged from the drain valve.

features
- Filtration accuracy up to 25 microns.
- The flow is not interrupted when cleaning the element.
- Manual or fully automatic operation.
- A wide range of material options.
- Advanced PLC control system.
- It is suitable for the filtration of medium and high viscosity liquids.
applications
- Water treatment
- Desalination
- Oil & Gas
- Pulp and paper
- Food and beverages
- Power
- Pharmaceutical
- Electronics
- Chemical
Our advantages
Complete models
We provide a variety of models and specifications of self-cleaning filters to meet the needs of different customers.
Reliable quality
The products are made of high-quality materials and advanced technology to ensure stable and reliable quality.
Excellent performance
High filtration efficiency, thorough cleaning, long service life. Customized designs are available to meet specific needs.
Perfect service
We provide a full range of services such as pre-sales consultation, in-sale guidance, and after-sales service.
FAQ
01.What maintenance is required?
02.What are the main benefits compared with basket strainers or backwash filters?
03. What are common failure modes and troubleshooting steps?
- Motor not running - check power supply, motor starter, fuses, torque overloads, control logic.
- No cleaning despite DP rise - verify DP sensor, control setpoints, actuator power, and scraper linkage.
- Leak at drain valve - inspect valve seat, actuator seal, replace valve cartridge or gasket.
- Excessive pressure drop - check for damaged screen, inappropriate mesh, or stuck scraper; clean or replace screen.
- Frequent clogging - use coarser mesh, increase cleaning frequency, add a coarse pre‑screen upstream.
workshop




Customer site




Hot Tags: automatic self cleaning scraper strainer, China automatic self cleaning scraper strainer manufacturers, suppliers, factory, scraper self cleaning filter, scanning self cleaning filter, water treatment equipment, self cleaning filter, automatic self cleaning screen filter, automatic self cleaning brush filter



